Lowered my nova 40mm, and it wore the tyres down on the inside edge in about 2000 miles. Not good I thought, so off I went to adjust the camber.
I read that in order to correct the camber I was to move the top hole in the strut 5mm.
After doing this, the car looked as if it was about to fly off (back to the future 2 style ). So obiviously 5mm was way too much off an adjustment?
Have i messed up somewhere in a stupid stupid way?
Can I just use smaller bolts to get enough adjustment, rather than hacking up more struts?
See pick for prgress:
Any suggestions on how to do it properly, but on the cheap?