Can anyone get me pictures of the centre of the clutch plate for a C20XE and the C20LET. (or even the C25XE)
I'm in the middle of a re-conversion of a C20LET, but in a RWD configuration, using the Getrag 240 Manta 1800 Gearbox. I WAS using the 1800 Manta clutch assembly, but it just slips with anything more than 1/2 throttle.
I know the C20XE plate DOES NOT fit over the splines of the Getrag 240, but I heard somewhere that the C20LET or the C25XE use diffrent gearbox splines that "MAY" be compatable with the Getrag 240 gearbox.
Also if anyone can confirm the Diameter of the Clutch plate too, Is the C20LET and the C20XE plate the same diameter? As I'm throwing the Dish flywheel and replacing it with the thin C20XE one. and hopefully run a hybrid setup to get things working.
C20XE Pressure plate
C20LET Clutch Plate
Manta 1800 Release bearing
I hope that works....
Oh, and if anyone has some half-decent ones lying about they want to get rid of for a little cash. (I don't wanna buy New as you can only seem to get full Kits now)