I'm looking to replace my existing rad with another that I've sourced, the new one is the same core size but shorter end tanks.
However, the new one has an additional pipe connector at the very top, looks as if it would be connected to the header tank via a hose. any gen?
My existing rad doesn't have this.
The header tank has another small (breather/overflow?) pipe which is route back into a coolant pipe which looks like it goes to the heater matrix.
So my theory being that I stick in a T peice on the hose to the header tank then connect the new hose to the top of the rad and the exisiting pipe back into the heater matrix pipe.
hope its clear to read-ish.
Last edited by astramojo; 16-08-2004 at 15:27.