It is about time I got some extra sensors fitted to my engine, in particular oil pressure and temp sensors so I can connect appropriate gauges. I am not sure if fitting an oil cooler would be advisable now I am running higher revs with the TBs. Where have you guys fitted the above sensors. I know you can get a combined oil pressure switch and sender unit for the 2.0 engine, but it costs 80 notes, and has no temperature sensor. I was thinking about getting a sandwich plate tapped for the sensors, but if I am going to fit an oil cooler in the future I would need space for a thermostatic sandwich plate and coudn't fit the sensors in there as oil would only flow at high temps. What have you guys running the 1.6 engines done.