Anyone put a Centrifugal Supercharger on a nova 1.4 sr????
I am building one as a project for the weekend just wondered if anyone had any gen on what to do do with the carb. Will I have to use one off a R5 or can I get away with the pierburg that is already on there?
Just building a prototype really, mostly out of bits I already have so any coments welcome (apart from the standard "stick a C20LET in it")
For those of you who are interested the bits that I have so far are:
4 x 625 ABEC 9 bearings with Poly glass cages
2 x 6201 ABEC 9 bearings with Poly glass cages
Garrett T-15 Turbo (yes I know it is a bit on the small side but as I say it is only a prototype and I had it sitting in the shed doing nothing)
20 tooth T5 alloy pulley.
60 tooth T5 alloy pulley.
Steel reinforced T5 toothed belt to run the internal step up.
Looking at using another pulley running either off the crank shaft or piggy backed onto the alternator to drive the main pulley.
Looking at between a 7.5/9-1 step up.
Any help much appreciated.
Now I just have to sit hear and wait for people to rip the **** out of me! lmao