I've got most of it off but have the last part which looks pretty tight. I've removed the top two bolts, but which other two do i remove? The ones to the left are wrapped around the cams and run in succession along the cams, so wheres the other two, and can anyone suggest how i can prise it off as my last attemp left dents in the head (see my other post).
Oh, and i presume I can only take tehe top half of this off as the lower part looks like its connected to the head.
that silver housing for the distributor is part of the bearing cap for the camshaft
if you need that off youll need to take that bearing cap off too by undoing those 2 nuts you can see.
oh and to get it off i used a rubber mallet and tapped each side at a time while pulling it up
what you trying to do anyway ? if your changing to dizzyless ignition, that end cap actually stays, and you put a blanking plate in place of the dizzy. (also whack a ball bearing down the oil gallery in the end of the camshaft)