i posted on cavweb but no1 seems to know so i tought id ask here
my car just stalled driving along last nyte, had a big puff of smoke and got it recovered home last nyte and looked this mornin to find my ecu light wasnt coming on, searched a bit more (with some help from jamie gsi on the net) and found my switched live for the ecu was melted from up by the sus strut down through the plug and up towards the eng loom, so i run a new supply to the ecu to then find no spark- no power to the coil! so i checked and the wire i had no bypassed supplyed 12v to the coil too! so now i have 12v at the coil and the ecu comes on, theres no sign of any other wire damage, but still have no spark so now im well peeved been workin outside in the rain all day (did the aux drive belt too) the only thing now is the 4x4 lights flashing everything else seems norm but no spark! ive checked and theres no output on the siganl wire but it is intact back to the ecu, b4 u say i have tryed a new crank sensor! anyhelp would be good!