temp sensors for x16xe / c20xe
does anyknow know if the temperature sensors are the same for X16XE and 20xe engines?
I have put the one from my old x16xe engine into my 20xe and just wanted to check incase the resistances were different.
if you still have the old one compare the part number stamped on them.
At a guess id say they were the same.
if they are both blue, they are compatible
> does anyknow know if the temperature sensors are the same for X16XE and 20xe engines?
temp senor for the ECU (ie CTS)?
They are pretty much the same across all the Vx cars.
My Nova GTE CTS is the same as my Calibra C20XE/LET.
But a new one is only £7 froma BOSCH delaer anyway.
hmmmm.... Had a look at a couple of different ones today:
The bosch number on the one that came in the 20xe was 874 but this was removed cus the plastic bit for the plug was broken.
The bosch number for one in a friends 1.6 is 362
The bosch number for a 1.4 nova sri engine is 762
All numbers are different
The CTS on my Calibra and Nova is the same, which is 90 510 183.
Looking EPC this is used on the following....plus many more which I can't be bothered to type out.
Nova 1.2L, 1.4L, 1.6L
Corsa 1.2L, 1.4L, 1.6L
Cav 1.4L, 1.6L, 1.8L, 2.0L (not ecotec), 2.5L
Calibra 2.0L (not ecotec), 2.5L
Vectra 1.6L, 2.0L, 2.5L
Omega 1.8L, 2L, 3L
Basically if its 2-pin sensor, theres a good chance it will work with your system
he was comparing them on my engines. we found a 3 digit number, obviosuly not the bosch part number though!!!
i tried convince him there all the same but he wasnt having any
> we found a 3 digit number, obviosuly not the bosch part number though!!!
BOSCH numbers usually start with 020 xxx xxx etc.
They change their part numbers just like GM, thats why some GM numbers in EPC are different in different version of EPC, they keep on updating their database.