hello im putting a c20let into corsa i have allready got a c20xe in it at moment but one things puzzling me the front engine mount on the let is lower than the c20 and the power steering pump is above the engine mount how do i get round this on the c20 the engine mount is at the top of engine block and the power steering pump is at the bottom the other way round to the let any help would be appreciated cheers
What an amazing coincidence (spell?) this is !
A mate is doing this conversion & we started removing the C20XE today & came across the same problem which we've been discussing within the last 2 hrs lmao
Here's our conclusion 'so far'
With both engines out, remove low mount from LET & remove the PAS pump from above it.
Remove the C20XE mount & bolt it on to where the PAS pump was on the LET (in the higher position)
Then we are going to try using the original Corsa GSI PAS pump, mounting it on the LET into the lower position (where the LET mount went originally)
The only unsure thing is the length of the PAS pump belt (these can be purchased in varying lengths)
If this doesn't work, we may try using the LET pump in the lower position &, again see where this leaves us regarding required PAS belt length.
This is as far as we have got as we are continuing thursday onwards.