Drive Shaft Query
quick simple question,
if i changed my 18xe to a LET, could i use my driveshafts and/or engine mounts?
Yes you can use you existing driveshafts .
Engine mounts.......without seeing not 100% but they should all fit .
You using the F-28 six speeder or an F-20 ?
Let me know
Chuck, use the same shafts as you have so u can keep the ABS.
Id use an F28 if possible but and F20 is cheaper and less work to fit.
F28 - use F20 back mount and F28 front mount + F28 Linkage (and convert it to 2wd)
F20 use f18 mounts and f18 linkage (basically straight swap)
Funnily enough this is my summer's project.
And hopefully get a 200ts replica as close 2 the real thing as possible.
Keep an eye out for some GSi bumpers for me mate.
ohh **** there was a whole gsi kit off a breaking car that went for 150 last week in gorseinon mate!
plan would be to use an f20 or even f16?
use an f20 chuck cos the f16 is only best on a c20xe, the LET would destroy it.
Definatly , the F-16 is so fragile compaired to the F-20 . The only thing that i found with my F-20 coupled to an LET the box seem to use oil - but their wasn't any leaks or ote - weerd !!! Originally posted by jjcymru use an f20 chuck cos the f16 is only best on a c20xe, the LET would destroy it.
If you can get an F-28 as they are very good especially if you up the power + torque .