Fuel Pump Wiring
I'm in the latter stages of fitting a c20xe into my 8v calibra but have come across a small problem. The three fuel pump connectors that go into the drivers footwell (2 black 1 green) have got....
green: 5 wires xe loom (4 wires c20ne loom)
black: 5 wires xe loom, (3 wires c20ne loom)
i have matched the colours and the pump is fuelling the injector rail but i want to check whats the best thing to do about this.
the car is turning over but not ready to start yet
any advice very welcome as always
if they will fit just plug them in.
There may be wires that don't match, leave them disconnected.
All done and running nicely, thanks andy