anybody have any ideas about this little problem of mine. i have just fitted a c20xe engine to my corsa. all went fine after initial start up until i tried to switch it off, when it wouldnt switch off!! i disconnected BOTH battery terminals and it still ran on. the engine is on mbe management, and i also used the standard loom from the 1.2, ie alternator and starter motor wiring. any help on this would be much appreciated as my brain is fried!!
the car is running on the alt alone you need to break the alternator wire that goes to ure dash i cant remember what colour it is but it needs to be broken when you switch the engine off, wire it using a relay to break it or something , alternativly break the 12 v feed to the coil this will stop the engine just as well.