Oil Temp Sender Question...
Ive got the temp sender that came with the gauge, but its got a m22 thread on it, and it wont fit anywhere. The gauge goes up to 170 degrees C, but the sender is marker 180 degrees max.
Any ideas where i could get a compatable sender from?
the big nut at the tip of the oil pump is M22, wont go in there no ?
yeah it goes in fine, but the probe sticks into the gallery thats there, so u dunno if thats a good idea or not
Originally posted by 0ddball the big nut at the tip of the oil pump is M22, wont go in there no ?
just done the same thing to my mates cav turbo. apart from a leak that we sorted with PTFE tape its fine.
oh right, so it wont effect the flow of oil then? On my sender the probe bit sticks out about 20mm
we went for an M10 sender with M22 adapter, protrudes into channel about 10mil. youve got about 3 inches till you hit an gallery as such. its just a tube.
was the blanking plug Very tight or did it undo fairly easy?
Originally posted by 0ddball just done the same thing to my mates cav turbo. apart from a leak that we sorted with PTFE tape its fine.