Few questions about my C20LET Mk4 Astra, throttle cable, coilovers etc.

[Joe-2LT]

Where can I buy a C20LET throttle cable from? Tried google'in it but not much come up!

Also I've just recently bought 308mm drilled and grooved disks, gsi calipers, carriers and red stuff pads for my astra, will they fit behind my 16 inch wheels? Haven't tried fitting yet as waiting to buy coilovers then going to fit them both at the same time (makes sense). These are my wheels:



What coilovers would you guys recommend? I've got a budget of £250 for these (As i need to get a 3inch exhaust system), I've been recommended Jamex ones.

Also, remote central locking has just stopped working for some reason, changed the battery in the key and still no luck, the little red light is coming on on the key when i press it, but not locking the car, any ideas what this could be guys?

My motor is a Astra Mk4 C20LET.

Thanks in advance

[Jamie_Hastings1]

Autovaux for the cable. 308s will fit behind 16s. And personally a would spend more money on decent set of coilovers and hold off for an exhuast. Probably faulty central locking motor.

[Joe-2LT]

you should see my exhaust, then say that again haha! I'll jack it up on the weekend and show you it, its an absolute disgrace lmao

Cable and brakes, thats spot on cheers mate

central locking, hmm where is the motor located buddy?

coilovers, yeah your probs right, was thinking about getting a whiteline RARB too, as the car proper rolls around corners if you know what i mean. The suspension bottomed out the other day aswell on a country road, deffo need something alot stiffer!

What bhp would you say this is running:

C20LET
JE forged pistons
steel rods
arp's conrods, head studs, flywheel etc
z20let oil pump with modified pickup pipe
xe inlet cam on vernier pulley
cometic head gasket
coscast head
f28 box with 2wd conversion
lightened flywheel from courtenay
kkk16 turbo with uprated actuator
(was told it was a hybrid s144 but it says bloody kkk on the turbo so guessing he lied!!)
running just over 1 bar boost
frontera intercooler
s/s pipes to intercooler
baileys dumpvalve
eds phase 3 chip in the motronic PJ ecu
standard injectors
blue samco's
k & n filter
****ty exhaust (awaiting on getting a custom 3 inch turbo back)

erm can't think of anything else on engine spec

[Jamie_Hastings1]

Should be 300ish but someone with more knowledge will know. Should run more boost on phase 3. 1.2bar i think. Got an engine bay pic considering building one of these myself and got offerd a good 2.2 Sri.

[crombievts]

Should be 300ish but someone with more knowledge will know. Should run more boost on phase 3. 1.2bar i think. Got an engine bay pic considering building one of these myself and got offerd a good 2.2 Sri.

sweet, txt me when your selling it

[Astra Dan]

Try turning the ignition on and pressing unlock on the key.

[Jamie_Hastings1]

Pmd Crombie

[Joe-2LT]

right will do mate, i'll let you know what happens Dan

[Joe-2LT]

have i got a bay pic? yeah sure will upload some tonight after work bud