manifolds for let/gt series turbo's on ebay again

**leesturbo** · 01-09-2006 18:53

not seen these for a while so if ya won't one.
http://cgi.ebay.co.uk/Nissan-Silvia-...QQcmdZViewItem

**ScottB** · 02-09-2006 11:51

Same manifold i run by the looks of it.

**jonlem** · 02-09-2006 12:01

Thats dirt cheap.

Whats the quality really like though ?

A mate of mine brought a cheapy one for his 2.5 Skyline engien and tbh although its probably better than the standard one its not made very well at all.

**ScottB** · 02-09-2006 12:09

Quality is much improved upon the ebay specials of a few years ago. The design has been revised. Bore diameter is better suited, pipes are now mandrel bent where possible unlike the welded sections the design used to have, manifold to turbo flanges are flat(no longer need to skim them before fitting).

The finish inside is also much improved, no nasty bits of weld ready to fall off into your compressor.

I was weary after hearing of their dodgy reputation in the past, but for £90 i took the gamble and was throughly impressed for the money. If it cracks, i'll buy another one.

**leesturbo** · 02-09-2006 12:39

running one for the last year. spot on.

**Liam McCabe** · 02-09-2006 13:08

so i take it you will have to weld the c20let flange to that manifold?

**wayne451** · 02-09-2006 13:12

**** me thats cheap! Are the ports in the same place on a 200 as on a LET? What about the stud locations?

**Rs1** · 02-09-2006 13:17

Originally Posted by wayne451

**** me thats cheap! Are the ports in the same place on a 200 as on a LET? What about the stud locations?

Nope you have to cut the flange off and weld a LET one on. It will also require heating and bending of the runner to get them lined up correctly. Not a bit job at all and for that price a very good manifold imo.

**sbd16vastra** · 02-09-2006 20:17

same manifold i have for my gte

**BarryGTE** · 02-09-2006 20:33

what turbo are they made to take?

**Gsi_kid** · 02-09-2006 22:25

the gt28 i believe, the same unit nissan run on the sr20det.

**BarryGTE** · 02-09-2006 22:31

cheers mate,do you know anything about these turbos or even where i can get one from.That manifold is looking very tempting

**Nemesis** · 03-09-2006 08:20

Is an XE flange the same as a LET one (it must be right?)

**neil105** · 03-09-2006 08:59

Originally Posted by Chavtastic

Is an XE flange the same as a LET one (it must be right?)

some times you realy let yourself down

**Nemesis** · 03-09-2006 09:00

I just wondered if it was any thicker/same material thats all.

**neil105** · 03-09-2006 09:15

good recovery,there's an adapter plate on ebay tho item 260017333170

Thread: manifolds for let/gt series turbo's on ebay again

LinkBack

Thread Tools

manifolds for let/gt series turbo's on ebay again

Posting Permissions